|
I have now had some talk about the molds/models.
We have 3 options.
1*Riveted on
2*Double sided wing - For double sided tape attachment
3*Complete trunk.
These 3 options is diff price for molds etc, So the molds for a complete trunk is more than double the cost to produce and for the molds as the riveted option.
Looking at other trunks on the market that is not having this complex shape is around 1000$ and that is something we def would charge or more for a complete trunk, Due to the shape of the rear etc and depending on material choice.
For a riveted solution it will be alot cheaper but yet again, Nothing that people prefers,
That leaves us to a complete wing with 2 sides for mounting with 3m tape.
And also for the wing we needed to make some changes for it to be able to make without risk of deformations in molding process.
See attached image. For us this small change is ok as the rest of the wing is able to keep intact.
/S
|