Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - FRS / BRZ Sub Box Prototype - Need Volunteer for Quick Test Fit and Pics

Integrity Concepts · 04-16-2013, 04:41 PM

Hi all, My name is Dan and I am the Owner / Operator of Integrity Concepts a new FT86club official vendor that is located in the NW Region, Lynnwood, WA. to be exact. We are Prototyping a few vehicle specific fiberglass subwoofer boxes for the 2013 Scion FRS / BRZ. More info about our build can be found here:

http://www.ft86club.com/forums/showthread.php?t=31813

I need to ask a favor from one of you. Our donor vehicle for this project is currently out of town, and we are at a point in the process where we need to test fit our 4 prototypes before we proceed into making the production molds. They do not need to be mounted, just set in the corners of the trunk, this will take 5 to 10 min tops, and will not cause any damage or dirt whatsoever. we would like to take a few pics and check our carpet sample for a match with the factory trunkliner, so a clean trunk would be preferred. I can meet you anywhere in the North King or Snohomish County area. ASAP would be best. Let me know, and thanks for the help guys.

P.S. When the final product is nearing completion we will try to make it out to a few area meets so you NW guys can get a first look.

04-16-2013, 04:41 PM	#1
Integrity Concepts Join Date: Mar 2013 Drives: Concepts Location: Bothell, WA Posts: 193 Thanks: 78 Thanked 141 Times in 88 Posts Mentioned: 10 Post(s) Tagged: 0 Thread(s)	FRS / BRZ Sub Box Prototype - Need Volunteer for Quick Test Fit and Pics Hi all, My name is Dan and I am the Owner / Operator of Integrity Concepts a new FT86club official vendor that is located in the NW Region, Lynnwood, WA. to be exact. We are Prototyping a few vehicle specific fiberglass subwoofer boxes for the 2013 Scion FRS / BRZ. More info about our build can be found here: http://www.ft86club.com/forums/showthread.php?t=31813 I need to ask a favor from one of you. Our donor vehicle for this project is currently out of town, and we are at a point in the process where we need to test fit our 4 prototypes before we proceed into making the production molds. They do not need to be mounted, just set in the corners of the trunk, this will take 5 to 10 min tops, and will not cause any damage or dirt whatsoever. we would like to take a few pics and check our carpet sample for a match with the factory trunkliner, so a clean trunk would be preferred. I can meet you anywhere in the North King or Snohomish County area. ASAP would be best. Let me know, and thanks for the help guys. P.S. When the final product is nearing completion we will try to make it out to a few area meets so you NW guys can get a first look.