Quote:
Originally Posted by Sportsguy83
In that case, they re-wired.
The problem you will have following that DIY, is that your car is an 86, so your connectors and cable routing might be a little different. Your DRL's are in the bumper right? You need to re-wire the LED's to be powered with the same source as your DRL's. You would need to either take it to a good experienced mecahnic, or read the 86 wiring manual to figure out exactly which cables need to be run.
|
we don't have any part in front lighting with DRL's enabled here.. even Subaru BRZ didn't have the strip LED above foglamp.. means that for every front lights to be ON we have click it..
i will look for a wiring diagram..