View Single Post
Old 04-14-2013, 05:32 PM   #332
Silverdub
Boostin'
 
Silverdub's Avatar
 
Join Date: Jun 2012
Drives: FRS-T
Location: Montreal
Posts: 1,042
Thanks: 337
Thanked 489 Times in 241 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
@Visconti

Hi John! i am finally ready to order my tune. ive been driving my car around for a couple of days with the wastegate open to make sure that everything was good and working properly with no oil or coolant leaks. A friend of mine has an ecutek cable so i wont need one for now.

I tested my wastegate actuator on the bench and it starts to open at 7.5psi and is fully open at 8psi. i also have a 4 bar map sensor. I always run on 91octane but if i need to run 94 i can get access to it as well. I am using stock injectors for now... i believe that 8 psi was the limit for these but correct me if i am wrong. i also have no catalytic converter between my 2 o2 sensors so i dont know if you can do something about it... i currently have a cel because of that. i would also like to have launchcontrol if possible!

please hit me up soon with all the info that you need and where to send you the funds! i would like to chip the car this comming saturday!!

sincerely,
Max
Silverdub is offline