View Single Post
Old 04-11-2013, 02:20 AM   #44
Retro86
Senior Member
 
Retro86's Avatar
 
Join Date: Jan 2013
Drives: Awesome
Location: Vancouver, BC
Posts: 295
Thanks: 167
Thanked 78 Times in 61 Posts
Mentioned: 0 Post(s)
Quote:
Originally Posted by FRSFirestorm View Post
I grounded here at a factory ground point. You can see 3 (with fog ground) in the picture. This is looking down into the engine compartment. The yellow part is the oil fill tube. There is another ground point directly accross the bay for the passenger side.

From the pictures it looks like there is a ground wire in the connectors for the turn signals. A possiblility. The black wires have to be grounds.

i wasnt sure if it was the ground cause i disconnected the black wire and the signal still lit but it didnt flash when i turned the turn-signal, thats why i just grounded mine like that in the pic. dont wanna short anythin up.
__________________
Retro86 is offline   Reply With Quote