Quote:
Originally Posted by Chaetagnath
If I read this right, you have the phasetek kit with the connector which slides into the bulb slot, and you want to know why you cannot simply run the ground from that to the switch so you don't need to tap the dome light? You can do that i think. I chose to tap the pink wire instead so that my floor well lights are completely independent of the dome light.
|
ya i want ur setup, but what i ment was since the pink sends the door signal to the dome, and that wire sends it to the footwells (OEM phasetek way), shouldnt i be able to just tap that instead of pink so as to not risk frying my ECU?