Quote:
Originally Posted by Chaetagnath
If the dome light is working fine, and the line is going directly from the tap to the switch, then it must be the tap didn't work then. What kind of tap did you end up going with? Unsnap the tap and inspect the wire, it should cut through the rubber all the way to the wire. Try again either with a lower gauge tap, or try to really clamp it tight, and be sure the wire is sitting right in that metal groove. If this is your first time tapping you may want to practice on some spare wire first to get the hang of it.
 |
So my diagram is correct tho?
And after it didnt work i didn't use a tap, we held wire to wire so it was a clear connection being made. That's wuts weird. Imma try and get my friends tester to see for sure wtf is up