Quote:
Originally Posted by kmbkk
That was the driver's side. On the passenger side is a white/red wire that terminates into the turn signal connector as well, as seen below
|
Quote:
Originally Posted by kmbkk
The wires are as follows:
Driver's side
White/red connects to a solid red for the turn signal
Red/white doesn't go to anything on the other side of the connector
Passenger's side
White/red doesn't go to anything on the other side of the connector
My thought is we can either use the empty side of the turn signal connector to tie to the hot side of the fog lights, utilizing the red/white and white/red wires on their respective sides. Or get the part number for the harness on the turn signal light side (the one with the fog light wiring) and just replace it. Any other thoughts?
|
If the connector from a BRZ is available that would be the best option. Otherwise find the pins for the specific connector and install them.