Quote:
Originally Posted by King Tut
Would love to see a plot of Boost versus RPM from your failsafe gauge when you get it done. I just open the CSV in Excel and make graphs. You can also modify the CSV file slightly to get it to open in EcuTek.
|
@
King Tut, as a disclaimer, I haven't yet stepped on at full throttle and I don't yet have a smooth tune, but here is the RPM vs. Boost plot from the Failsafe Gauge..... there are about three data points up @ 9 psi... (honestly need to check the actuator line to MBC, its supposed to be at 7)
Edit: Oops, just read your above post and I inverted the X and Y axis. Let me know if you want boost in the X axis.
