04-05-2013, 12:10 AM
|
#40
|
|
Senior Member
Join Date: Mar 2012
Drives: 13 Subaru BRZ, 02 Toyota 4Runner
Location: Camden County, NJ
Posts: 338
Thanks: 38
Thanked 64 Times in 57 Posts
Mentioned: 2 Post(s)
|
Quote:
Originally Posted by 996garage
Great writeup. Looks so simple, I'm going to make my own cord as well.
Can I ask you to confirm that of the 4 wires in the RJ-11 cable (yellow, green, black, & red), you are indeed just soldering the 2 D-Sub connectors to only the black and red wires? (so the green & yellow wires are unused)
Quote:
Originally Posted by kykiee
I made my own Invisicord. It came out pretty nice.
All you need is a Soldering Iron, Solder, Heat-Shrink Tubes/Electrical Tape, and Pin Connectors from a 9 Pin Male Crimp D-Sub Connecter, and RJ-11 Telephone Cable.
|
|
You want to use the middle two wires. If you look at the connector you will see two wires in the middle. For me, it was the green and red.
__________________
2013 Subaru BRZ Limited - GBS - 6MT - VIN #01197
 |
|
|