Quote:
Originally Posted by 2forme
I dremeled the sides and trimmed the front of the Metra kit. They sit in frontt of the side tabs on the head unit. Trim off the the little lip on the front of the Metra pieces to make them "skinnier" (when looking at them installed). Does that make sense.
|
i had mine sitting in front of the side bevel of the headunit (not behind, like the picture posted a few posts above) and the dash panel was hitting the left and right sides of the metra kit. It was as if the HU with the metra kit was way too wide to fit in the space that the dash panel allows. Nearly a quarter inch it seems from looking at it.
Also as for the sound quality through bluetooth, it really isnt very good, but i found that lowering the volume on your phone has a major effect on the quality.