Quote:
Originally Posted by Sony
You very well could have overtightened something...the exhaust bolts only need to be tightened to 25 ft-lbs...tightening with an impact means they are probably closer to 125ft-lbs which could warp flanges.
Also check clearances around the transmission tunnel and those things, the Perrin had an issue where on some cars the resonator did not have enough clearance between the resonator and the trans tunnel and would hit the trans tunnel and make noise, easily fixed with a couple minor adjustments.
|
i'll definitely check that out. thanks man appreciate the info. wow 25ft lbs. fml hahaha. perhaps too late. i'll put it in the air on monday and see what's going on at work. thanks again!