Quote:
Originally Posted by white_knight
I'm fairly happy with my 530s, but I think the +33 offset produces too much poke, especially up front.
Does anyone know how it can be corrected? Camber bolts?
|
Yes you may do camber bolts, crash bolts, you can put a spacer in the rear to make a more staggered look but reality it's a square setup. Lower the car on some springs. Eibach pro kit should eliminate about 2-4mm and same with rear due to natural camber in the rear. I have a 35 offset and lowered on eibach pro kit and have about maybe less or a tad but more than 2mm. Camber bolts will work cause you can dial the front to about -1.5 and also you can get some LCA or whitelines rear bushing camber kit and dial the rear to just -1.0 and the car will have same look (super clean looking, trust me)