[scottmcphee]

New Feature Alert!

I've added a highly requested feature to the product: allow wig-wag hazard flashing while driving the car (ignition on).

Normally, wig-wag and slow motion hazard modifiers are only possible to use while parked (with the ignition OFF). This is how it's always been with Tap Turn and is how the new product ships by default.

However, the new product lets you enable hazard modifiers to work while in motion by changing a programmable setting once Tap Turn is installed. It's easy to do: start the car, signal right, turn on hazard switch, turn off car. Now you have wig-wag in motion (wig-wam?), and also slow motion hazard modifiers available to use while driving. Just turn on hazards and the signal stalk to get the modifier you want, at any time.

Another New Feature Alert #2!

I've also added a factory reset. This restores the product to default settings (as received). In doing so hazard modifiers while in motion are disabled again, and Tap Turn blinks reset to three (3). It's easy too: start the car, signal left, turn on hazard switch, turn off car. Now the unit is reset. You can only use hazard modifiers while parked (ignition off) again, and Tap Turn works while driving giving 3 blinks.

With new features comes new responsiblities. It may be a moving traffic violation to use wig-wag flashers while driving on public roads. Check your local traffic laws before deciding its OK for you to use wig-wag while in motion.