Hey guys, just want to clarify on the rear camber bolts. H&R makes two camber bolts that can fit in the rear of our cars. The TC 112 bolts will fit in the lower mounts, which are easy to get to, but they have to be modified to fit. H&R doesn't recommend doing this, because it could affect the strength of the bolt. Using these alone will be able to get most customers to around -1.5 camber.
@
OmarGC I was wrong about +-2 degrees, it's a lot less than that, sorry! More like +-.5 or so.
The TC 114 will fit in the upper control arm connections, but they are really hard to get to, and are very difficult to install.
Hope that helps you guys!