|
It looks like a standard flasher, which slides onto a mount rather than pushes onto a mount. The direction to slide the flasher off its mount is to slide it away from the side the plug is on. The plug comes along with the flasher. Some cars use an adapter that slides onto the flasher and then that gets mounted to the car, however it is designed to... On FRS BRZ I think the adapter is pushed into a hole. Hence you can pull that out along with the flasher when you yank it. Maybe there's not enough room to slide the flasher off its mount point in this car... But you can try that first to see if it is possible. Once you have a flasher in your hand you can see how this makes sense.
|