[Huehuecoyotl]

So I finally got around to installing these, you need to use a press, so off to the shop I go.

Pretty tight, had to bust out the BFH.

There is the issue of me being a complete dumass with the ball joint fork, and nicking, ok, ripping, the rubber boot, so BE CAREFUL, I got one side off fine, and then had to kick myself for this stupidity.


Off to the dealer to score a new ball joint, as it appears my ripped boot isnt sold separate:
20206CA000=SU00300358= 43330K & 43340A, both scion p/n are the same Subie part, should be under $30-$40

Track specific Alignment & Driving review to follow as soon as I correct my mistake!