Quote:
Originally Posted by mad_sb
It is out already.. BRZedit.
to the OP...
Ecutek (and BRZedit) has the ability to adjust the majority of the maps that control the engine. Unichip can only alter the signals received by and sent from the ecu, it does not directly alter the maps. Based on the Website, it intercepts crank sensor (so it can alter ignition timing), Maf sensor (so it can alter engine load / fueling), and the Throttle motor so it can alter the dbw output.
Take cam timing for example, you can completely remap the cam timing maps with ecutek. With unichip the only changes you can make to cam timing are indirect changes via maf signal (engine load) manipulation, which is not sufficient to actually change the cam timing at WOT by any significant margin.
|
Yes...but does the BRZedit come for free/cheap w/ Ecutek tune/cable/licance so I can do my own in house tuning w/o a middle man. I need to log...open log files....read data...open current map...make adj to said map....download/save....flash(prob wrong term) to ECU...and then WOT log again and repeat....all im asking for is an AP really....sry..but im butt hurt that the FA20 does not have the Cobb AP or like yet....Im learning the whole tuning thing over again with this car.