Quote:
Originally Posted by WolfSongX
At this point, it's the easiest place to install the Second Skin Speaker Tweakers. They go behind the driver in the door and break up the back wave created by the speaker. They attach with super glue gel and there's a potential here to make a HUGE MESS and damage your paint... which I learned the hard way on my Si... Fortunately I didn't make the same mistakes as before but you literally have to put the whole tube of super glue gel on the back, then hold it into position while it bonds. I always try to have some Damplifer underneath of it to give it a good surface to bond to. They're flexible so I let the end fold at the door beam.
|
After reading this whole article, specifically this part I decided it was worth ordering a set of speaker tweakers. Being the idiot that I am, I didn't realize they come in pairs so now I've got two extra, doh! Secondly, I assumed they came with an adhesive but they didnt so... I have some Guerrilla Glue that should work well right? Finally, just want to confirm I have the procedure right...
Apply Damplifer
Place Guerrilla Glue on Damplifier Aluminum
Stick the flat side down on the Guerrilla Glue and hold? Ridges face the interior slash back of the door speaker?