View Single Post
Old 02-23-2013, 06:12 PM   #283
abutterman
Senior Member
 
abutterman's Avatar
 
Join Date: Dec 2012
Drives: 2013 BRZ Limited - WRB, MT
Location: Long Island, NY
Posts: 1,177
Thanks: 58
Thanked 176 Times in 139 Posts
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by Honeydew View Post
How did you remove those panels? Do you think i can just use plastidip to make them black? Also the door handles haha
the radio and dash trim just pop right off. Just carefully pull up from the left corner of the radio trim with a flat head or a plastic pry tool and it'll unclip. Once thats off, you can just pull at the edge of the right side dash trim and it'll unclip. Just be careful with the yellow clips... they tend to come off and get stuck or fall behind the dash. Vent rings, if you have any fingernails to use you can just pull them off. I dont so i just carefully separated it with a flat head from the bottom. Door handles... you want to pry up from the bottom near the fake leather trim. Those can sometimes take a good amount of force though. Just be careful and try to pull it out one clip at a time. Plastidip should be fine as long as you let it cure properly and use multiple light coats so it doesnt get all bumpy and disgusting. I plan on doing that for the door handles to save 50 bucks.
abutterman is offline   Reply With Quote
The Following User Says Thank You to abutterman For This Useful Post:
Minovsky (02-23-2013)