Quote:
Originally Posted by King Tut
I am almost positive I got a PM from someone who hooked up the RPM wire of the failsafe to one of the wires I mentioned and that it worked. I checked my PMs, but I must have deleted it.
|
Quote:
Originally Posted by Acree
King Tut,
I rechecked your post and I have to apologize. I definitely missed your details regarding the two wires. I do believe that the gray wire coming out of D48 would be suitable for the Tach signal. According to the wiring manual, it's coming out of the ECM labeled as "TACH." 
-Acree
-Acree |
I can live without dimming, since King Tut says it is livable. I did read King Tut's post about the cables that work, but I wanted one in the cluster
. But also, I have no idea where are those pins...
Any time you guys can take a pic or at least some directions and I'll figure it out from there.
I appreciate a LOT all of your help, including @
dwx.