Quote:
Originally Posted by kharn83
hiya ryan, with getting behind the bumper to unscrew the foglights, did u just do that by going behind the wheel arch, or did u need to remove the bumper?
also, if only wired the led drls to the fog light existing wire, how does that differ from wiring to headlight and fog light?
cheers and thanks!
|
You pull the bezel off, very easy. Use your hand, screwdrivers will scratch. You will need to turn front wheel either side and get in from behind, enuf space. Remove 2 screws on the fog lights and just pops off.
As for the wiring I put the positive onto the fog harness positive with those red crimp clips and then wired the black earth to the screw below the fuse box.
I did not use the white or blue wires as the LED is perfect on bright setting for both day and night, have not had anyone flash me due the led being too bright.
Very very easy install took me 1 hour taking it slowly and buy this way you can turn your led on or off from the inside switch. I did not connect to ignition, so I could have my radio at ACC on with all the lights off.
Hope this helps.