Quote:
Originally Posted by Acree
I'm an electrical engineer and self-proclaimed wiring guru. I've been doing automotive wiring since I was 16 and for the last 10 years. I'd be glad to help if you still need it.
Can you first provide a link or make and model of the exact gauge(s) you purchased?
-Acree
|
Of course!! I'm a mechanical engineer so :happy0180:.
Here are the instructions to the gaugues:
AEM 30-4900 Failsafe
Instructions:
AEM 30-4402 Digital Water Temp Gauge
Instructions:
On the Failsafe, I don't care about the blue, yellow, brown, white cables as those are outputs to a data logger/boost control device and I don't have one. Also, don't care too much about the Tach cable, just figured it would be nice to install it to log AFR, Boost vs. RPM and check it out later on the computer. (Of course ECUTek can do that but for those times I don't want to be dragging the laptop around)
The Oil Temp sensor is pretty straight forward., I don't have questions about it.
My main question at the moment is about the dimming cable and getting it to work right. Power source to the gauges I have pretty much nailed down from the ideas above. See previous posts about how the dimming is kind of partially working for king tut.
Thanks in advance, all help is always appreciated!.