Quote:
Originally Posted by FA20Club.com
Ecu is reset every time you flash either way. The IAM on the base files is .7 with a multiplier of .3 for advancing. You should notice that some cars even when set to 1.0 IAM after a while will be lower depending on driving characteristics of the owner along with other factors. This would explain why most cars logged a week later drop a little in power from foreign factors. And why a simple reset gets back to the full power again. Setting the IAM to 1.0 does help but the ecu is smart enough to pull back for safety its best to consider it a starting point not an absolute minimum.
|
It is at 0.7 on the ECUTEK base files yes, but it is set at 1.0 on the stock ECU.