|
R&D update… we’ve completed our Perrin CAI maps and should get them posted tomorrow. Two new CAI’s on their way and as soon as we get them we’ll get the maps built and posted.
We have also made great progress on our Fuel In and Fuel Out maps which are being reviewed this week and should be posted by the end of the weekend.
As always, if you have a MapsQ Download cable, all of the maps are yours any time you want to load them up.
ScionFrsFan… e85 and 93 octane – yes and no. You won’t have a single map for both fuels without the Flux Fuel kit; however, you could certainly run a 93 octane map in the Main Map Set and an e85 map in Map Set 2 and just flip the switch to change between them. The only thing you’d want to do is run the old fuel essentially dry and then fill completely with the new fuel so the fuel is correctly matched to the calibration. Obviously, the beauty of the Flex Fuel kit is that the map does adapt automatically…
Nardi330… Oil temp is one of the additions in the next firmware update (free update for anybody with the kit)
Cheers
|