Quote:
Originally Posted by xjohnx
could you take pics of how you tapped power for the camera?
|
I'll be honest I copied the way of the original poster in stripping and doubling up the power wire and shoving it in the same hole as the green amp power wire. I did strip the tape back a bit and was going to use a different method but once this was tiewrapped/taped together and plugged in I could see it wasn't going anywhere.
I usually use these solder sleeve connectors which have solder in the middle which you melt with a heat gun, they work great. I was just going to cut the amp power wire in the middle so I could do a 2->1 junction. But I got lazy.