Quote:
Originally Posted by PNW FRS
For another car I have that had this issue, I did the following to dry out the housing. We have an upright clothes dryer that has a shoe rack. I put this in, put the housing on the rack and ran the dryer on low heat for as long as it took for the moisture to evaporate. YMMV
|
I was thinking if drilling a hole in the bottom to let it dry and then using a blow dryer. I opened the lights to paint them black, but moisture is coming from the stock gasket... Tested it.
You would think that when they make something that allows the whole trunk to fill with water they would fix it..... My entire trunk is soaked bc the water goes under the vanity guard... And through the holes in the frame .. Water is getting in the tails through the big red brake light hole....to me this seems like a manufacturer screw up.