Quote:
Originally Posted by post_break
It's because the Perrin piece isn't compatible with the whiteline bushing. It's pretty obvious when you have to trim the whiteline bushing. It's not recommended because it just sends vibrations into the cabin. Remove the Perrin bolt and use the stock one.
|
Correct. @
F1point4 did clarify that the two pieces were incompatible "at this time" but he also stated that you can grind/ shave off the inside diameter of the whiteline bushing to allow the Perrin piece to fit. Also why I wanted to keep tabs on this thread to see if he found a solution.
Still waiting. ...
