Quote:
Originally Posted by FRSFirestorm
I'm getting prepared to change out my springs. I plan on doing the spring compressors and pass through ratchet to remove the top hat.
I didn't have a pass through ratchet so while in Lowe's today I bought one, along with extension and 14mm socket based upon this information. For giggles when I got home I popped the rubber boot on top of the front strut and tried the setup. 14mm didn't fit. Need a 17mm socket for the top nut.
|
14mm for the rear, 17mm for the front.
__________________
-Dave
Track cars: 2013 Scion FRS, 1998 Acura Integra Type-R, 1993 Honda Civic Hatchback
DD: 2005 Acura TSX
Tow: 2022 F-450
Toys: 2001 Chevrolet Corvette Z06, 1993 Toyota MR2 Turbo, 1994 Toyota MR2 Turbo, 1991 Mitsubishi Galant VR-4
Parts: 2015 Subaru BRZ Limited, 2005 Acura TSX
Projects: 2013 Subaru BRZ Limited track car build
FS: 2004 GMC Sierra 2500 LT CCSB 8.1/Allison with 99k miles
|