Quote:
Originally Posted by King Tut
I already installed my AEM Failsafe. Are you looking for RPM pickup? I can tell you the dimmer wires don't work at all with our wiring. As for the RPM pickup there are a couple wires you can tap into near the OBDII port on the passenger side. For power I used a fuse tap, and I did my own ground to the chassis with a ring terminal near the fuse box.
|
Yeah I need the rpm pick up, I used wire splices for power, ground, and dimmer. I just hooked the dimmer up to the accessory line, probably wont have an effect but whatever. If you could take a picture of where you tapped for rpm I would be very grateful!