Jack!
>>
We got a couple of calls about changing the screen maps names in the Flux2 Display… there is a cable you can connect and use Hyperterminal to make the names whatever you want. When we ship a Display, it normally just says Map 1, Map 2, etc… since we don’t always know what guys are going to load where. We can certainly program custom names if desired… just let us know. If you want to program it yourself, here's a link to the cable...
http://www.unichip.us/products/42-Flux-Download-Cable.
<<
To questions/issues:
1) With the Flux2, and USB cable plugged in to back of the Flux2, and HyperTerminal running on COM4 at 115,200 8-N-1, all I see is gibberish. When I hit the space bar, type 'help' or 'menu' or whatever it says command not recognized, etc. When I use the prior purchased map download cable plugged into the Unichip itself, I don't have success with the serial connectivity.
2) With the Flux2, and USB cable plugged in to the back of the Flux 2, and mapping software loaded, it shows intermittent serial connectivity and therefore I can not remap the Unichip. However, when using the prior purchased map download cable plugged into the Unichip itself, I have great success (no issues) with mapping the Unichip.
Please advise how I can change the names of the display via 1).
Please advise why I am having the issues with USB-IN-CAR via Flux2 versus directly plugged in - success.
Otherwise, no issues with Flux2! Besides it being bulky, I custom mounted it and it works great!
Thanks!
Brian