Quote:
Originally Posted by doggy
No spray can! Stay away from single component clears! They are good for few months that's it...
What im using is ceramic based 2 component clear coat. Its as hard as resin, and its UV protective, and NO yellowing / no cracking with it!
|
The ceramic 2 component clear coat can be transfered into a presurised spray can as well. Well, the atomisation might not be the same as if it comes out of gun with 300-3000 PSI but it is good enough for small surfaces. On a bigger surface, you need air gun for sure. All clear coats (urethane 2 components for automotive use) would have a UV protection (more or less effective depending on the money you spend on the clear/hardner).