Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Sluggish/Stalling After aFe Intake Install

FR-S Matt · 01-15-2013, 08:57 PM

Problem is fixed! I retightened everything when I got home. Made sure there were no leaks on any piece, from the filter, to the throttle body. The crank hose is in snug, and the MAF is fine. I had the negative terminal unplugged for 20 minutes roughly. Plugged it back in and let the car idle for 15 minutes, then went for a drive.

Car is running great and I feel the power gains already. Does feel a bit different on take offs but I feel the power when hitting the gas.

Thanks Jeremy and the rest of you guys for all the input. Absolutely loving the Intake now!

01-15-2013, 08:57 PM	#7
FR-S Matt Banned Join Date: Nov 2012 Drives: 2013 Ultramarine FR-S MT Location: Round Rock, TX Posts: 3,941 Thanks: 679 Thanked 1,771 Times in 1,111 Posts Mentioned: 38 Post(s)	Problem is fixed! I retightened everything when I got home. Made sure there were no leaks on any piece, from the filter, to the throttle body. The crank hose is in snug, and the MAF is fine. I had the negative terminal unplugged for 20 minutes roughly. Plugged it back in and let the car idle for 15 minutes, then went for a drive. Car is running great and I feel the power gains already. Does feel a bit different on take offs but I feel the power when hitting the gas. Thanks Jeremy and the rest of you guys for all the input. Absolutely loving the Intake now!