Quote:
Originally Posted by omegared19
Any recommendations on how to heat them up? I don't want to sit there like an idiot with my girlfriend's hair dryer for forever and not get them hot enough. I do have a heat gun, but don't want to strip the paint/STi logo.  |
I was originally going to use heat on mine, but I didn't want to ruin the finish on the caliper. The plugs are put in with red loctite which is why the heat might be required. I can't believe that I got lucky enough to get all the plugs out with no heat and no issues. Your best bet is going to be a small nozzle propane torch that you can get the heat right on the bolt head. I took my plugs out after I had already mounted the calipers.