Quote:
Originally Posted by cityhugo
if is not a clearance issue and If u r using Whiteline end links, make sure all the nuts are tight, esp the nuts that locks the length adjustment. They seem to like to work themselves loose, make sure u use 2 wrenches vs 1.
|
^This.
Also check where the endlink connects to the swaybar to make sure it is tight. I had noise issues on my driver's side and was finally able to identify that the bolt holding the endlink to the swaybar on the driver's side was not tightened all of the way. This was kinda tricky as with the car on the ground it felt tight, but when I put the front end up on jackstands and the suspension at full drop the load was off the swaybar and I found the endlink mount was loose.