|
I tried running a few scans, car on, car off etc.
The only code I found interesting was 21E3
The equation I used was A-40. The problem was that when the car turned on, I didn't receive any data.
After a few more attempts (hot car, cold car, on, off etc), I concluded that the code isn't correct for oil temp.
I am starting to think that the code for oil temp is not a simple 2 byte code, but something more advanced or perhaps the reply is a longer byte message with only 2 or 3 bytes used for oil temp.
I think Yruyur mentioned this on the previous page as well.
|