Got my Tap Turn. Nicely packaged. The case of the device looks just like the OEM flasher. Very professional. I bet the average Toyobaru technician would never notice that it's an aftermarket flasher. Works just as advertised. Really cool. Thanks again Scott!
A few install notes:
1) You cannot remove the cable from the original flasher without removing the flasher from under the dash. If you just pull straight down fairly hard the clip holding the OEM flasher will come out of the dash.
2) There are some sharp metal parts above where the flasher is located, don't cut yourself like I did.
3) You can move the clip from the OEM flasher unit and attach it to the Tap Turn and then reattach it to the original location.