Yeah to me it seems that the foam gasket is where the water is getting by into the back, then into the small holes around the bulb socket openings. Notice in the pic below, how little bits of leaves/dirt is getting caught on the adhesive which only seems to cover the top portion of the foam gasket. As flimsy as the gasket is, I can see how even just removing the tails once could ruin the integrity of the foam gasket's seal against the lens housing or against the body panels. I'm thinking if you put a ring of silicone or other similar substance around the gasket before installing it, it will help keep the water out of the back?
Quote:
Originally Posted by PMok
|