[ike44]

Originally Posted by brillo

the stock pioneer head unit is a true dual din sized device correct?

The stock pioneer is 200mm. Regular double din is something like 180mm I think? In order to replace the HU, you will need fillers for either side.

I posted this a while ago, and I am not sure if any newer products have come out since then. But these are what I used to change mine. The stock harnesses will not be modified IIRC. Just the harness that connects to the HU and the harness between the stock and the HU harness.

Originally Posted by ike44

Wiring harness

Dash kit (requires modification, but cheap)


Antenna adapter

Note, this can work too and wont require modification, but is 30 bucks.