Quote:
Originally Posted by gmookher
between the kc416's and a nice set of camber plates, like vorschlags or GC's you should be able to get 2.5 to -3, isnt that enough?
|
getting front camber doesn't seem to be an issue with the current options; it's the back that seems like it's going to be a hassle, especially if your rear camber is uneven from the factory. here are a couple options i can think of to remedy this issue.
1. aftermarket adjustable rear control arm.
2. whiteline rear bushings.
3. lowering the car with aftermarket coilovers (adds negative camber), and you can adjust the rear height to get your desired negative camber.