Quote:
Originally Posted by feldy
Hey all,
Picked up a set of 17x9 +35 rpf1s. Going to run a 245/40/17 rs3 in the summer and a 245/35 toyo R1r in spring and late fall. Currently stock springs. Running -2 degrees of camber up front. Going to rce yellow springs and plan on running -2degrees or more up front. You guys see any issues with rubbing under load?
|
Quote:
Originally Posted by whataboutbob
I'd be interested in input on this as well. I've got the same wheels on order and will be running 245/40R71 Dunlop Z2s. I've put Whiteline camber bolts and caster bushings on, and will be adding COMCs and the adjustable rear camber bushings.
|
It's doable. Hard to say if the front would rub the fender. Depends on your camber, spring rate and shock compression. Not a whole lot of room on the outside at fender edge. I wouldn't sweat it. Take some measurements though before purchase.
Edit look up at the white FRS with Rota Grid 9" +30. Just a 5mm difference. Tires are another story but irrelevant.