View Single Post
Old 10-13-2011, 05:14 PM   #283
82mm 4g63
4G63 & Rotary
 
82mm 4g63's Avatar
 
Join Date: Jun 2011
Drives: 92TalonAWD, 93RX7, 11F150EcoBoost
Location: Florida
Posts: 627
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Send a message via AIM to 82mm 4g63
Quote:
Originally Posted by madfast View Post
but that's a BIG plus on a street car... not to mention flatter torque curve and throttle response.
It's a BIG plus if we were talking about 104mm non ball-bearing turbochargers with ridiculous power surge, not daily drivers with small-medium sized turbochargers which aren't very laggy to begin with.

If we're going to talk about big pluses for street cars, turbocharging a street car not only offers better fuel economy than supercharging, but that little delay/lag in power delivery actually provides a small cushion and doesn't beat on drive train components nearly as much as supercharging. Not to mention being able to dial the boost down for your less aggressive trips to the grocery story and only breaking the tires loose when you intend to do so.

Too much credit is given to supercharger throttle response. Sure it's great for burning the tires at a stop light, but not very good for a hard pull on the freeway. Big bottom end and moderate mid/high range isn't as exciting as moderate bottom end and big mid/high range on a street, track or drag car. I don't mind waiting a couple milliseconds for my turbo to spool.
82mm 4g63 is offline   Reply With Quote