Quote:
Originally Posted by JoeBoxer
The ones Evasive are selling are 3.0/4.5 so i wonder if the BRZ are still in development or what. Still trying to decide on these plus Koni's or Tein Street Basis. I want a little more drop than the Racecomps provide. I have Tein H Tech already might try them on the Koni's first
|
If you look at their website, they actually have two part numbers but quote the same spring rate for both:
4T909 T for Toyota?
4F912 F for Fuji?
My information came second hand from Swift when the springs were ordered. I wanted a more balanced spring rate, like the stock BRZ, not pronounced rear biased stock FRS rates. If they had not had a more balanced "BRZ" rate, I would have ordered Racecomp's springs.
The shop that installed the springs measured the spring rates on a Longacre spring tool and I should have those values soon.
Initial impression was the ride is no worse than stock. There looked to be an extremely slight progressive aspect to the construction, but nothing close to as the Eibachs. Quite a bit lighter than the Eibachs as well though.