|
Note to anyone looking to perform the DRL delete.
You can see in the pics on the first post a small rectangular vented panel just next to the area of plastic this thread says to remove. If you pull gently this panel will just pop off. Depending on the size of your arm you can just put your hand in there, the drl resistor plug is immediately above the panel.
You can carefully unplug the resistor, wrap the wire around the harness and tuck the end against the frame. This took me about 1 minute, required no tools or supplies, and was totally effective.
If you look on the back of that access panel there is a nice Subaru logo (on my NA FRS).
Thanks Subaru!
|