Quote:
Originally Posted by Brody602
I guess I miss understood the OBD connection, so you have a usb cable going from the back of your HU into your footwell area to the OBD device? What are it's storage abilties? i.e. I want to install the TomTom app for gps navigation instead (not sure if it's supported with 2.2 though) Also do you have a website or something to the ca-fi unit so I can take a closer look, and maybe order it later down the road if I make a decision? as far as pre outs are concerned, I only have 1 purpose for my nexus 7 and its to run torque and gps.
Thanks,
Brody
|
Yea, I have fairly decent size feet and have yet to hit the OBD adapter. I run a USB splitter in the glove box. USB is actually better than a Wifi or a Buetooth adapter because it refreshes the information in very close to real time. There is maybe a .1-.2 second delay. It refreshes a lot faster, too.
You can use up to a 32GB microSD card, 32GB USB stick and it has 8GB of storage in the unit.
I've used Be-On-Road, Sygic, CoPilot, and NavFree on the head unit. Settled on Be-On-Road for nav.
www.ca-fi.com
You can hit me up on PM if you have any other questions. I don't want to hijack the thread
