Quote:
Originally Posted by Justin.b
I'm assuming the extra charge is for the flywheel unless your department usually replaces that with a normal clutch service.
-Justin
|
On a normal clutch service we resurface the flywheel. However the cost of doing the labor on a clutch job is reduced if we don't have to send the flywheel out to be resurfaced and are just replacing it. Usually this is if the owner wants a lightweight flywheel or they have destroyed the original flywheel beyond where a resurface would be able to fix it.
$495 for Labor w/o Resurface
$575 for Labor w/Resurface
Those are for a WRX, again the FRS/BRZ would likely be less than that due to the RWD v. AWD.
-Mike Paisan
11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.
Call directly as We carry almost every manufacturer now, so before you buy parts call us.
Like us on Facebook! | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.AZP1 (2971) | T-1 Certified Amsoil Direct Jobber |AIM: AZP Installs
"Race Tested, Enthusiast Approved!"