Thread: Window issues
View Single Post
Old 11-29-2012, 01:55 PM   #36
chanomatik
Snow Don't Hurt!
 
chanomatik's Avatar
 
Join Date: Jul 2012
Drives: 2013 BRZ Limited 6MT CBS
Location: Anchorage, Alaska, USA
Posts: 2,538
Thanks: 6,416
Thanked 1,497 Times in 902 Posts
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quote:
Originally Posted by smbrm View Post
Glad you found a solution.Thanks for the info. Are you willing to offer a page number or other hints?

cheers
Quote:
Originally Posted by mezdup View Post
i don't recall the page off hand, but it's a pretty simple procedure. also the manual confused me a bit as to what exactly it was instructing me to do, but this is eventually what did the trick for me based on what it said:

1. get inside car and close all of the doors
2. turn car to "on" position so you can use the power window controls
3. hold down the window down button (in auto position) until the window comes all the way down and continue holding for an additional 3 or 4 seconds
4. pull up the same button (in auto position) to bring the window up all the way and continue holding for an additional 3 or 4 seconds again after it's reached the top

the window mechanism should have reset itself now and the flashing "auto" lights should have gone away. if not, just try it again, but this worked for me on my first attempt.
Auto-Up/Down and Passenger Window Not Working

Just to let you know that there's an on-going thread solution for the windows. I've had to reset mine several times this winter, usually after I've left the car running for a long while or have been driving around in the cold for a bit. It bewilders me since it's not like it happens when the car is at it's coldest, so I'm assuming something is thawing and dripping on the controls or something?
chanomatik is offline   Reply With Quote
The Following User Says Thank You to chanomatik For This Useful Post:
mezdup (11-29-2012)