|
I got my injen intake 2 days ago and im completly stock and as soon as i drove off it started bogging but mostly around 4000 rpm!! I have 9000 kms on odo and never had a problem or a cel!! I can hardly accelerate if i go past 15-20% throttle. I took it off to make sure everything was well installed and i noticed that the welds where the map goes are sticking out on the inside of intake not much but but enough so you can see and feel it! I was wondering if people that had the bog issue cheked to see if it was all nice and smooth in there intake!! Im gonna polish it tomorow and remove the small bumps to see if it changes anything i will keep you posted! I cant imagine a bump right beside the map would be too much of a good thing! I also tried the above steps many ecu resets and nothing seems to work! If anyone has some insight on this it would be greatly appreciated!!
|