Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Will this fit? (width, offset and tire size Qs)

dsgerbc · 11-07-2012, 09:19 PM

http://www.myturbodiesel.com/1000q/w...eels-5x100.htm

Bolt pattern will be ok, center bore is 1mm off, offset is aggressive, or the herrafrush kind, but might be ok. I doubt there is a .5mm hub ring, so you'll need proper lugs for the wheels to seat properly.
Audi uses ball seat (R14 iirc), so stock lugs won't work. Or will work for a couple of blocks until the first pothole.
GOOOD LUCK finding proper lugs. Some dude on the forum bought spacers, but there is no way to tell if the curvature in those is okay for Audi.

In short I wouldn't do it. Go to nasioc and find something. Should be plenty of peeps in NY area.

11-07-2012, 09:19 PM	#278
dsgerbc Senior Member Join Date: Jan 2012 Drives: BRZ(sold), STI Location: A2, MI Posts: 1,915 Thanks: 176 Thanked 419 Times in 241 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	http://www.myturbodiesel.com/1000q/w...eels-5x100.htm Bolt pattern will be ok, center bore is 1mm off, offset is aggressive, or the herrafrush kind, but might be ok. I doubt there is a .5mm hub ring, so you'll need proper lugs for the wheels to seat properly. Audi uses ball seat (R14 iirc), so stock lugs won't work. Or will work for a couple of blocks until the first pothole. GOOOD LUCK finding proper lugs. Some dude on the forum bought spacers, but there is no way to tell if the curvature in those is okay for Audi. In short I wouldn't do it. Go to nasioc and find something. Should be plenty of peeps in NY area.