Quote:
Originally Posted by meeks
your answer contradicts one of the vendor's answer to this tho, see below:
excuse the overfenders but hoping some functionality/looks to this effect (picture as a reference..again mmmmkkk?)
|
I have a hard time believing it'd come close to fitting. Nissans like that can take a really low (0 or negative) offset like that. That setup on an 86 would push the outside of the wheel about 2" out from stock. Go check that with a ruler/tape and see if it's what you want.
For reference, my wheels are 17x9 and +28mm offset. They stick out too much for my tastes, especially with semi-wide tires. Negative camber would help there, but still not what I'm ultimately going for. To compare, my setup sticks out roughly 1" from stock.
This is a handy comparison tool:
http://www.rimsntires.com/specs.jsp